|
Suspension Pictures
Here is some of the suspension modifications that I have done to the car.
|
|
|
Prothane Poly Lower Control Arm Bushings
Supplier: Thunder Racing
Cost: $ 35
Opionion: These greatly reduced wheel hop and increased cornering ability. The mix of the Poly Bushings and Stock LCA prevent bind and allow the stock LCA to flex. I am very happy with these but the install was very hard. The stock bushings had to be pressed out (this was the hardest part) and the new bushings pressed in. Without proper tools this install is impossible and you will damage the LCA
|
|
|
|
Prothane Panhard Bar Bushings
Supplier: Thunder Racing
Cost: $ 25
Opionion: These also reduced wheel hop and increased cornering ability. The mix of the Poly Bushings and Stock Panhard Bar prevent bind and allow the stock Bar to flex. I am very happy with these and the install was very easy.
|
Stock Torque Arm
The stock arm is sufficent for the Power that the V6 puts out, but the bushing could be upgraded. |
|
|
|
Prothane Poly Torque Arm Bushing
Supplier: Thunder Racing
Cost: $ 20
Opinion: This bushing made the car feel more connected to the ground. I didn't get too much vibration becuase I matched this with the 1LE trans mount instead of a poly mount. The install was kind of a pain but hopfully the end justified the means.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
